125 Hawthorne Avenue, St. Joseph, MI 49085 USA
Phone: 269-983-2582 or 800-542-2420

Rosback

Products

Literature

Service

Contact Us

Spare Parts Store


Preventative Maintenance & Lube Schedule
for Rosback Trimmers

This preventive maintenance schedule describes basic maintenance for your Rosback finishing equipment that will help keep it in good continuous operating condition.  The recommendations in this schedule is based on average use and operating conditions. Alter this schedule as required by the conditions in your facility.

Click on these links for printer-friendly documents or scroll down to view
Maintenance Record Service Sheet    or   
250 Series Trimmer Maintenance & Lube Schedule

WARNING!  Make sure the input power is OFF.  Disconnect, lock and tag before starting any service or maintenance work.  This is to avoid any possibilities of becoming entangled in moving parts or severe, possibly fatal electrical shock.

Before doing any of these procedures:

  • Disconnect machine from its power source.

  • Always be alert.

  • Study your situation.

  • Do the easiest things first.

  • Double check before powering machine.

Preventative Maintenance & Lube Schedule

Schedule Description Action
Daily Keep metal surfaces clean, free from dust, and rust. A light coat of SAE 10 oil may be added to metal surfaces that do not come in contact with paper stock. It is a good idea to cover the trimmer when it is not in use to keep dust from settling in working parts.
Bi-Weekly Grease cams and rollers. Apply NLGI #2 multipurpose lithium molybdenum disulfide grease. DO NOT over lubricate. Wipe away excess grease.
Bi-Weekly Grease knife castings. Apply NLGI #2 multipurpose lithium molybdenum disulfide grease. DO NOT over lubricate. Wipe away excess grease.
Bi-Weekly Oil all drive chains and sprockets. Apply SAE 30 oil to both chains.
DO NOT over lubricate. Wipe away excess oil.
Monthly Clean all tapes. Clean with a blanket wash or alcohol based cleaner.
Monthly Grease pivot shaft.
(Top nipples located on lower frame, both sides)
Apply NLGI #2 multipurpose lithium molybdenum disulfide grease. DO NOT over lubricate. Wipe away excess grease.
Monthly Grease bearings.
(Bottom two nipples located on lower frame, both sides)
Apply NLGI #2 multipurpose lithium molybdenum disulfide grease. DO NOT over lubricate. Wipe away excess grease.
Monthly Pull rod ends (all) Apply NLGI #2 multipurpose lithium molybdenum disulfide grease. DO NOT over lubricate. Wipe away excess grease.
Monthly Inspect belts. Replace if necessary.
Monthly Grease motor and variable pulley. Apply NLGI #2 multipurpose lithium molybdenum disulfide grease. DO NOT over lubricate. Wipe away excess grease.
Rarely Drive gears. Should not need to be greased. If they do, use Moly 29 open gear compound. Wipe away excess grease.

ROSBACK'S Contact Info...

Telephone
269-983-2582
800-542-2420
              7:30 AM ~ 4:15 PM Eastern Standard Time, Mon ~ Fri
FAX
269-983-2516
E-mail
Sales & Customer Support: rosbacksales@qtm.net
 

Rosback Homepage ~ News ~ 2008 Exhibitions ~ Other Links
About Us ~ Rosback History ~ Maps to Rosback ~ Support Staff ~ Feedback ~ Site Map
Manufactured in the USA since 1881