|
Preventative Maintenance & Lube Schedule
for Rosback Stitchers
This preventive maintenance schedule describes basic maintenance for your
Rosback finishing equipment that will help keep it in good continuous
operating condition. The recommendations in this schedule is based
on average use and operating conditions. Alter this schedule as required by the
conditions in your facility.
Click
on these links for printer-friendly documents or scroll down to view
Maintenance
Record Service Sheet or 201
& 203 Saddle Stitcher Maintenance & Lube Schedule
WARNING!
Make sure the input power is OFF.
Disconnect, lock and tag before starting any service or maintenance work.
This is to avoid any possibilities of becoming entangled in moving parts
or severe, possibly fatal electrical shock.
Before doing any of these procedures:
-
Disconnect
machine from its power source.
-
Always
be alert.
-
Study
your situation.
-
Do
the easiest things first.
-
Double
check before powering machine.
|
Preventative Maintenance & Lube
Schedule |
| Schedule |
Description |
Action |
| Daily |
Keep metal surfaces clean, free from dust, and
rust. |
A light coat of SAE 30 oil may be added to
metal surfaces that do not come in contact with paper stock. It is a good
idea to cover the perforator when it is not in use to keep dust from
settling in working parts. |
| Bi-Weekly |
Lube all bushing pivot points. |
Apply SAE 30 oil. DO NOT over lubricate.
Wipe
away excess oil. |
| Bi-Weekly |
Oil stitcher head casting and lift rod
bearings. |
Apply SAE 30 oil. DO NOT over lubricate.
Wipe
away excess oil. |
| Bi-Weekly |
Oil feed-finger guide shaft. |
Apply SAE 30 oil. DO NOT over lubricate.
Wipe
away excess oil. |
| Bi-Weekly |
Oil all drive chains and sprockets. |
Apply SAE 30 oil. DO NOT over lubricate.
Wipe
away excess oil. |
| Monthly |
Check motor gearbox oil level. |
If necessary, add 600 W Super Cylinder oil thru
the filler plug until it starts coming out the oil level plug.
DO NOT
overfill. |
| Monthly |
Inspect belts. |
Replace if necessary. |
| Monthly |
Grease all drive gears. |
Apply NLGI #2 multipurpose lithium molybdenum
disulfide grease to drive gears. DO NOT over lubricate. Wipe away excess
grease. |
| Monthly |
Clean tapes. |
Clean with a blanket wash or alcohol based
cleaner. |
ROSBACK'S Contact Info...
- Telephone
- 269-983-2582
800-542-2420
-
7:30 AM ~ 4:15 PM Eastern Standard Time, Mon ~ Fri
- FAX
- 269-983-2516
- E-mail
- Sales & Customer Support: rosbacksales@qtm.net
| 