This preventive maintenance schedule describes basic maintenance for
your Rosback finishing equipment that will help keep it in good continuous
operating
condition. The recommendations in this schedule is based on average use
and operating conditions. Alter this schedule as required by the conditions in
your facility.
|
Preventative Maintenance & Lube
Schedule |
| Schedule |
Description |
Action |
| Daily |
Keep metal surfaces clean, free from dust, and rust. |
A light coat of SAE 30 oil may be added to metal surfaces
that do not come in contact with paper stock. It is a good idea to cover
the perforator when it is not in use to keep dust from settling in working
parts. |
| Periodically |
Contaminated gluepot. |
Depending on use, clean gluepot using
paraffin wax. Replenish pot with new glue. |
| Weekly |
Full or semi-full dust bag. |
Remove and empty dust bag. Reinstall bag
before next use. |
| Weekly |
Lubricate register table, nipping station and
delivery chute to prevent excess book adhesive sticking to components. |
Use silicone spray. |
| Monthly |
Lubricate gluepot bearings. |
Use quality high temperature oil. |
| Monthly |
Lubricate gluepot gearing. |
Use quality high temperature grease. |
| Monthly |
Lubricate main drive, clamp and glue pot
chains. |
Use Light oil. |
| Monthly |
Lubricate pivot points on cutter motor
guards. |
Use Light oil. |
| Monthly |
Lubricate nipper pivot points and bearings. |
Use Light oil. |
| Monthly |
Check cutter blade, gate and notcher/rougher
for sharpness. |
Replace if necessary.
880-087 Saw Blade
880-088 Carbide Tipped Notcher/Rougher
880-110 Saw Blade Gate. |
| Monthly |
Check motor gearbox oil levels. |
If necessary, add 600 W Super Cylinder oil
thru the filler plug until it starts coming out the oil level plug. DO
NOT overfill. |
| Bi-Monthly |
Lubricate register table lift mechanism. |
Use Light oil. |
