Click image for larger view
Rosback Model 920 And 923 Conveyor
Print
Literature
The Rosback 920 and 923 Conveyors allow continuous production on Rosback Perforators by eliminating the need to stop and unload. The 920 and 923 Conveyors roll up to the Rosback Perforators or other equipment and delivers “shingled” single sheets. Deliver onto the 920 and 923 Conveyors from your Rosback Perforator to complete long runs even faster.
Rosback Model 920 And 923 Conveyor Specs
Model :Model 920 Model 923
Width :
20" (50.8 cm)
26" (66.0 cm)
Length :55.5"
Height :29.5" to 37" Adjustable in increments of 1.5"
Weight :
86 lbs
Shipping Weight :
266 lbs
Surface Speed :
Maximum 32 ft/min. Minimum 11 ft/min.
Standard Electrical Supply :
120 Vac, 60 Hz, 1Ph, 5 Amp
(circuit breaker protected recommended)
High Volt Electrical Supply :
Optional 230 Vac, 50Hz, 1 Ph, 10 Amp (fused disconnect required)
*Contact ROSBACK
PERFORMANCE FEATURES:
Run jobs much faster by reducing unloading time.
Adjustable height above floor from 29.5" to 37" in 1.5" increments.
Can be used inline with all 220,223,226 TrueLines, SR series, and 240 series Rosback Perforators.
Variable speed DC controls.
Greater stock capacity than the standard delivery table.
Lockable swivel with brake casters for easy mobility.
Simple and quick adjustment of conveyor tape and control wheel positions.
Use up to 7 conveyor tapes and control wheels (3 tapes standard).
Produce slitting without any center trim removal, no need for special delivery dividers.
Fast accurate production of multiple printed sheets, no guillotining required.
STANDARD EQUIPMENT:
Three Conveyor Tapes
Three 4” Control Wheels
Three 2” Control Wheels
Three Sheet Deflectors
1 Set of Tools
AVAILABLE OPTIONS & ACCESSORIES
TrueScore Digital Score Head Series
“CD” Inlay Heads Gutter Slitter/Perf Heads
Knife-Cut /Slot Cut Perf Heads
Micro-Perf Heads Slitting Heads
Scoring Heads – Special Extra Wide
Truescore Digital Scoring System Pressure-Sensitive Slitting Attachment Narrow Margin Perf Heads
(3/8” From Sheet Edge)
Special Slot-Perf Heads
(1/2” Between Perf Lines)
Special Engineered Heads
Upon Request
Jogger Delivery, (240 Series)
Conveyor Delivery
CE Guarding Package
Email Rosback for a
price quotation on our finishing equipment and dealer near you
