This 26-inch
heavy-duty true line perforator has been designed for quality, high
production, precision perforating, as well as scoring and slitting on stocks
ranging from 9 lb. manifold to 1/16" board. Models are available in
Vacuum or Friction Feed. A perfect choice for your
finishing equipment needs.
Rosback Model 223 True Line
Perforator Specs
Maximum sheet size:
26" W x 26" L
66cm x 66cm
Minimum sheet size:
3" W x 3" L
7.6cm x 7.6cm
Minimum space between standard lines of perforation:
3/4"
(1/2" available)
1.9cm
Standard edge margin:
3/4"
Narrow margin of 3/8" available
1.9cm
Length, front to back:
61"
154.9cm
Width, side to side:
38"
96.5cm
Height:
44"
111.8cm
Net weight (friction):
335 lbs
152 kg
Net weight (vacuum):
425 lbs
193 kg
Shipping weight (friction):
423 lbs
191.8 kg
Shipping weight (vacuum):
515 lbs
234 kg
Export shipping weight (friction):
520 lbs
236 kg
Export shipping weight (vacuum):
625 lbs
284 kg
Standard electrics (friction): 115v/60hz/1ph
5 amps*
Standard electrics (vacuum): Additional
115v/60hz/1ph 15 amp (circuit breaker required)
*Contact ROSBACK
for alternate electrical requirements.
NEW Option! The Gap Feed Option for the Rosback Vacuum TrueLine allows feeding onto a 248 or 249 Cross Perforator, or onto a right angle folder. Simple controls let the operator set the gap between sheets, ensuring a consistent product stream. Whether right angle perforating, scoring and folding, or simply sheet feeding, the gap feed option makes the industries best vacuum feeder even better.
* Greatly depends on stock to be run.
Standard True Line Perforator Features:
2 sets of perforating heads with burr rollers
1 set of scoring/creasing head
2 sets of drive rollers
1 set of tools
8 extra perforator blades
Miscellaneous extra parts
Finishing Equipment Accessories:
Perforating heads with burr rollers
Narrow margin 3/8" perforating heads
Special 1/2" slot perforating heads (between lines of
perforation)
*The optional slitting attachment for pressure
sensitive material permits partial slitting of stock. Due to the
consistent depth control required pressure sensitive slitting is recommended
only on the Model 223, 226 & 240 Series Perforators.
