Rosback Model 220 SR True Line Perforators
Video También Disponible En Español
Print
Literature
This heavy-duty true line Vacuum-Fed Perforators
Rosback Model 220 SR True
Line Perforator Specs
Minimum sheet size :5" x 4.6"
12.7 cm x 11.7 cm
Maximum sheet size :
20" x 23"
52 cm x 58 cm
Minimum Line Spacing :
Between lines of perforation :3/4"
1.9 cm
Between Score/Crease :
1/4" (6.4 mm) Standard
1/4" (6.4 mm) Standard
Standard edge margin :3/4"
1.9 cm
Length , front to back:
98"
249 cm
Width , side to side:
33"
84 cm
Height :
42"
107 cm
Net weight :
680 lbs.
308 kg
Shipping weight :
950 lbs.
431 kg
Export shipping weight :
1150 lbs.
522 kg
Standard electrics : 120
vac, 60 Hz, 1Ph, 5 amp (slow-blow recommended)*
Pump Supply : 120 vac, 60
Hz, 1Ph, 15 amp (circuit breaker required)*
Cycle Speed : Feet per hour
Up to 24,000
*Contact ROSBACK
Unique SR Series True Line Perforator Features:
Ergonomically located operating controls
Vacuum Feeding eliminates marking sensitive stock
Separate vacuum and pressure controls enhance performance
Speeds up to 24,000 feet/hr
100% accurate registration system including sheet deflectors and
micrometer dial for angular adjustments
Quickly add or remove heads
Run up to 5 heads
Handles materials ranging from 9-lb. onionskin to 1/16" board
Upgrade to an SRX with these added features:
Complete operator control with programmable sheet feeding
Standard total & batch counter
Add a conveyor delivery
Add a cross/right angle perforating unit
Note: Strike Perforating is not available on model 220SRX.
Finishing Equipment Accessories:
Spare parts are available in our Perforator Spare
Parts Store.
