|
Preventative Maintenance & Lube Schedule
for Rosback 220 Series Perforators
This preventive maintenance schedule describes basic maintenance
for your Rosback finishing equipment that will help keep it in good continuous
operating condition. The recommendations in this schedule is based
on average use and operating conditions. Alter this schedule as required by the
conditions in your facility.
Click
on these links for printer-friendly documents or scroll down to view
Maintenance
Record Service Sheet or 220
Series True-Line Perforator Maintenance & Lube Schedule
WARNING!
Make sure the input power is OFF.
Disconnect, lock and tag before starting any service or maintenance work.
This is to avoid any possibilities of becoming entangled in moving parts
or severe, possibly fatal electrical shock.
Before doing any of these procedures:
-
Disconnect
machine from its power source.
-
Always
be alert.
-
Study
your situation.
-
Do
the easiest things first.
-
Double
check before powering machine.
|
Preventative Maintenance & Lube
Schedule |
| Schedule |
Description |
Action |
| Daily |
Keep metal surfaces clean, free from dust, and
rust. |
A light coat of SAE 30 oil may be added to the
metal surfaces that do not come in contact with the paper stock. It is a
good idea to cover the perforator when it is not in use to keep dust from
settling in working parts. |
| Monthly |
Oil bushings for upper and cutter shafts.
(BUSHING CONSTRUCTION) |
Apply SAE 30 oil to oilite bushings. Make sure
oil reaches inside the bushings. |
| Monthly |
Grease bearings for upper and cutter shafts.
(BEARING CONSTRUCTION) |
Apply NLGI #2 multipurpose lithium molybdenum
disulfide grease to upper and lower cutter shaft bearings. |
| Monthly |
Oil all drive chains. |
Apply SAE 30 oil to both chains.
DO NOT over lubricate.
Wipe away excess oil. |
| Monthly |
Grease all drive gears. |
Apply NLGI #2 multipurpose lithium molybdenum
disulfide grease to drive gears. DO NOT over lubricate.
Wipe away excess
grease. |
| Quarterly |
Check internal vacuum filters,
replace if
necessary. |
Only necessary with machines running heavily
powdered stock. |
ROSBACK'S Contact Info...
- Telephone
- 269-983-2582
800-542-2420
-
7:30 AM ~ 4:15 PM Eastern Standard Time, Mon ~ Fri
- FAX
- 269-983-2516
- E-mail
- Sales & Customer Support: Sales@RosbackCompany.com
| 